A good meal and a good bath is something that most Americans enjoy thoroughly, but how can you enjoy either one when you’re in a room full of ugly water damage stains on the walls, floors, and ceilings? Many of these rooms often have the brown stains on the ceiling that are typical of water damage and while most people just paint over them, often the stains just keep coming back because the underlying problem has not been fixed yet.
It is probably due to a leaky roof, but what about the steam that comes off of your bath water or off of the stove when you cook dinner? These every day tasks can be just as much of a cause of water damage as a leaking roof can be, if not more so because they happen every day. At least, a bath a day comes recommended, anyway. Installing a steam vent in your bathroom for under $100 and a day’s work could possibly be one of the best investments that you can make to help safeguard the appearance and structural integrity of your kitchen and bathroom.
Make sure that you do not allow your bath tub or your kitchen sink to overflow. Sometimes we turn on the bath water and get stuck talking to a relative or a co-worker on the phone, all the while unaware that the water you wanted in your tub is pouring all over your floor. The same thing can happen when you are cooking in the kitchen or washing dishes. This can land quite a lot of water in your floor before you realize it and can do quite a bit of damage to your floor if you let it happen often.
An overflowing toilet is also a hazard, not only because of the water damage that can occur, but also due to the possible sewage content of the water when you go to flush it. If not cleaned up properly, mold can start to grow around the base of the toilet, especially if you have carpet in your bathroom. Carpet in the bathroom is a no-no.
Also avoid throwing wet dirty clothes into your bathroom floor or closet, especially if you happen to have a carpeted bathroom. You will probably forget that these wet clothes are there and throw dry ones on top of it.
This results in water damage and mold growth more often than not when the closet is not cleaned out. The best thing to do is to wash wet clothes and towels as soon as possible so they are not forgotten about or at the very least stored separately from dry dirty clothes.
Showing posts with label basement. Show all posts
Showing posts with label basement. Show all posts
Friday, January 18, 2008
What You Need When Removing Mold
A lot of people dream of purchasing a home that is a “fixer-upper”, but many are wary about purchasing homes that are contaminated with mold in different areas. Depending on how old the home is, what condition it is in structurally, and where it is located, it may be feasible to attempt to remediate the home yourself on top of the normal remodeling that you are going to have to do. When you have to remodel a home due to cosmetic issues, a lot of the time you have to remove building materials, anyway, so why not go the extra mile and remove the mold from the home?
Professional remediation can be expensive, but if you know what you are doing and know what equipment you will need to take up the job and complete it successfully, you could have a gem of a house in not a large amount of time.
If you do choose to remediate the home yourself instead of hiring a professional, you might want to know what you will need to do it. Hiring someone to at least assess the remediation needs of the home is advised. Some heavy duty chemicals that will kill the mold will be necessary if it is growing on non-porous surfaces like tile. Almost anything else that is contaminated by mold, such as drywall, will have to be removed and replaced. Remove any and everything from the home with mold on it; do not let it come into contact with new building materials that you have purchased.
Heavy duty trash bags and a vacuum cleaner with a HEPA filter system on it are recommended. The vacuum will remove any mold spores from the floor after the remediation job is done with.
Respirators are a must when taking on a mold remediation job. Even if the infection is not that severe, breathing mold spores is still a hazard to your health and many problems can arise. You may be allergic and not even know it. Purchase a good quality respirator if you plan on taking out any drywall or old wood. Protective clothing so the spores do not get on your skin is also a good idea. Purchase a roll of duct tape to seal the gaps between your protective suit and your shoes. Disposable protective clothing for mold remediation is available and it not very expensive. The most expensive piece of equipment you will need is the respirator and there is no reason to skimp on that part.
Professional remediation can be expensive, but if you know what you are doing and know what equipment you will need to take up the job and complete it successfully, you could have a gem of a house in not a large amount of time.
If you do choose to remediate the home yourself instead of hiring a professional, you might want to know what you will need to do it. Hiring someone to at least assess the remediation needs of the home is advised. Some heavy duty chemicals that will kill the mold will be necessary if it is growing on non-porous surfaces like tile. Almost anything else that is contaminated by mold, such as drywall, will have to be removed and replaced. Remove any and everything from the home with mold on it; do not let it come into contact with new building materials that you have purchased.
Heavy duty trash bags and a vacuum cleaner with a HEPA filter system on it are recommended. The vacuum will remove any mold spores from the floor after the remediation job is done with.
Respirators are a must when taking on a mold remediation job. Even if the infection is not that severe, breathing mold spores is still a hazard to your health and many problems can arise. You may be allergic and not even know it. Purchase a good quality respirator if you plan on taking out any drywall or old wood. Protective clothing so the spores do not get on your skin is also a good idea. Purchase a roll of duct tape to seal the gaps between your protective suit and your shoes. Disposable protective clothing for mold remediation is available and it not very expensive. The most expensive piece of equipment you will need is the respirator and there is no reason to skimp on that part.
What You Can Do to Prevent Water Damage
You might not be able to stop a hurricane or a flood from causing water damage to your home, but what you can stop are a lot of things in your home that can cause the same kind of damage, just on a smaller scale. They are quite simple and although you might forget to do them from time to time, as long as you make sure to check at least every once in a while, you (and your wallet) will be better protected against the surprise expense of water damage remediation.
One of the most frequent offenders of water damage tends to be the water heater itself. This should be located somewhere on the lowest floor of your home and in a drain pan connected to a pipe or hose that drains back into the sewer. This will make sure that even if your water heater does burst or begins to leak slowly, the water will not go into the floor, but down the drain. Most water heaters should be located in the basement and a leaky water heater down there is not going to be as much of a problem as one on the second or even third level of a home.
Make sure you have your rain gutters cleaned out at the end of autumn when the leaves have stopped falling. Your rain gutters are what keep water from simply sliding off your roof and settling around the foundation of your home. Water that collects around your home’s foundation can cause it to sink into the ground and even though this is a slow process, it can do a significant amount of damage to your home’s value. The downspouts should also be clear of any debris and water channeled away from the foundation. Soil around the base of your home should also be at such an angle that water naturally flows away from it.
Keep an eye on the pipes or hoses that go to your dishwasher and your clothes washer in the laundry room. Hoses can develop weak spots over time and develop leaks that can leave you in a huge mess, especially if you happen to be away from home at the grocery store or a friend’s when the leak begins.
Water damage can also be prevented by not forgetting that you have bath water running or water running in the kitchen sink. Overflowing sinks and tubs account for a lot of damage like this and can coat your floor with more water than you think in a very short period of time.
One of the most frequent offenders of water damage tends to be the water heater itself. This should be located somewhere on the lowest floor of your home and in a drain pan connected to a pipe or hose that drains back into the sewer. This will make sure that even if your water heater does burst or begins to leak slowly, the water will not go into the floor, but down the drain. Most water heaters should be located in the basement and a leaky water heater down there is not going to be as much of a problem as one on the second or even third level of a home.
Make sure you have your rain gutters cleaned out at the end of autumn when the leaves have stopped falling. Your rain gutters are what keep water from simply sliding off your roof and settling around the foundation of your home. Water that collects around your home’s foundation can cause it to sink into the ground and even though this is a slow process, it can do a significant amount of damage to your home’s value. The downspouts should also be clear of any debris and water channeled away from the foundation. Soil around the base of your home should also be at such an angle that water naturally flows away from it.
Keep an eye on the pipes or hoses that go to your dishwasher and your clothes washer in the laundry room. Hoses can develop weak spots over time and develop leaks that can leave you in a huge mess, especially if you happen to be away from home at the grocery store or a friend’s when the leak begins.
Water damage can also be prevented by not forgetting that you have bath water running or water running in the kitchen sink. Overflowing sinks and tubs account for a lot of damage like this and can coat your floor with more water than you think in a very short period of time.
Selling Moldy Real Estate
If you are trying to sell a house that is contaminated with mold, you probably have a pretty short list of possible buyers. You also probably do not want to lose any of those possible buyers and you want the transaction to go as smoothly as possible. There are a few tips that you can use when selling a home like this to make sure that you get the most you can possibly get.
You need to allow the buyer to inspect the house for themselves and find out what kind of mold exists on the property. An environmental inspection clause should be included into the sales contract. If you can have the mold removed from the home at your own expense without taking a huge profit loss, you should do so. A buyer will be much more quick to actually purchase the home from you if you are completely honest about the home’s condition. You will also be able to sell the home quicker if the mold inside it is not toxic. If you can prove that it is not via mold testing kits, then the sale will go by quicker.
Again, make no attempts to cover up the mold problem in the house. Do not be nervous about it. If it is beyond your ability to remove the mold, then tell the buyer so. Explain your situation. If they are sympathetic, they may or may not be more willing to purchase from you. If they suspect you are hiding something, however, they will likely walk right out the door.
In the final sales contract, you need to have a clause that releases you and anyone involved in your end of the deal from any legal liability due to the mold. This states that the buyer already knew that the mold existed on the property and that you are no longer responsible for its presence. Include that the home was sold to the buyer in an “as-is” state and that you are not responsible for the property nor is there any warranty on it, implied or otherwise.
List all past major damage that the home has suffered due to water damage or mold so that your buyer has a complete history. Giving this information to your buyer will show them that they can trust you and that you are hiding nothing from them. This should leave you on solid ground once the final contract is signed.
You need to allow the buyer to inspect the house for themselves and find out what kind of mold exists on the property. An environmental inspection clause should be included into the sales contract. If you can have the mold removed from the home at your own expense without taking a huge profit loss, you should do so. A buyer will be much more quick to actually purchase the home from you if you are completely honest about the home’s condition. You will also be able to sell the home quicker if the mold inside it is not toxic. If you can prove that it is not via mold testing kits, then the sale will go by quicker.
Again, make no attempts to cover up the mold problem in the house. Do not be nervous about it. If it is beyond your ability to remove the mold, then tell the buyer so. Explain your situation. If they are sympathetic, they may or may not be more willing to purchase from you. If they suspect you are hiding something, however, they will likely walk right out the door.
In the final sales contract, you need to have a clause that releases you and anyone involved in your end of the deal from any legal liability due to the mold. This states that the buyer already knew that the mold existed on the property and that you are no longer responsible for its presence. Include that the home was sold to the buyer in an “as-is” state and that you are not responsible for the property nor is there any warranty on it, implied or otherwise.
List all past major damage that the home has suffered due to water damage or mold so that your buyer has a complete history. Giving this information to your buyer will show them that they can trust you and that you are hiding nothing from them. This should leave you on solid ground once the final contract is signed.
Wednesday, January 16, 2008
How to Keep Your Basement Dry
Most homeowners do not consider the basement a very important part of the house, but since the rest of your home’s structure is on top of this, you might want to rethink just how valuable of a room this is. Whether you use it for storage, a guest bedroom, laundry room, or anything else you can think of, it is important to make sure that this room of the house remains structurally sound.
While it is a common problem, wet basements are something that most homeowners do not have to deal with if they take some precautions and the time to make some adjustments on their own. Many wet basement issues can be fixed by the homeowner without having to hire any outside help.
You can fix any cracks in the concrete walls of your basement where water is leaking in by using a simple injection of concrete. Doing this used to require expensive and heavy equipment, but the size and expense of this has gone down so significantly that you can now do it with a normal caulking gun. Do not try do this with the silicone caulking that you would use in a bathroom or kitchen or attempt to fix it with cement, either. These two items will only become loose and fall out, no longer forming the water barrier that you need to have in place.
If water is forming in puddles around the foundation of your house, then you probably need to pile some more soil around the house so the water runs away from the house instead of leaking down into the basement. Installing a drainage system can also help with this. Making sure your rain gutters stay cleaned out is also another thing that you can do to try and keep water out of your basement. While they seem unrelated, gutters that are clogged let water merely fall off the roof and down to the base of the house.
You can also choose to install a dehumidifier and some energy efficient windows. You will know that you have a humidity problem in the room if condensation builds up on the window panes. Putting in an exhaust vent down there can also help reduce the humidity, especially if you use the area as a laundry room or an extra bathroom. This helps prevent the steam from being absorbed by the rafters or the drywall ceiling.
While it is a common problem, wet basements are something that most homeowners do not have to deal with if they take some precautions and the time to make some adjustments on their own. Many wet basement issues can be fixed by the homeowner without having to hire any outside help.
You can fix any cracks in the concrete walls of your basement where water is leaking in by using a simple injection of concrete. Doing this used to require expensive and heavy equipment, but the size and expense of this has gone down so significantly that you can now do it with a normal caulking gun. Do not try do this with the silicone caulking that you would use in a bathroom or kitchen or attempt to fix it with cement, either. These two items will only become loose and fall out, no longer forming the water barrier that you need to have in place.
If water is forming in puddles around the foundation of your house, then you probably need to pile some more soil around the house so the water runs away from the house instead of leaking down into the basement. Installing a drainage system can also help with this. Making sure your rain gutters stay cleaned out is also another thing that you can do to try and keep water out of your basement. While they seem unrelated, gutters that are clogged let water merely fall off the roof and down to the base of the house.
You can also choose to install a dehumidifier and some energy efficient windows. You will know that you have a humidity problem in the room if condensation builds up on the window panes. Putting in an exhaust vent down there can also help reduce the humidity, especially if you use the area as a laundry room or an extra bathroom. This helps prevent the steam from being absorbed by the rafters or the drywall ceiling.
Subscribe to:
Posts (Atom)
