A good meal and a good bath is something that most Americans enjoy thoroughly, but how can you enjoy either one when you’re in a room full of ugly water damage stains on the walls, floors, and ceilings? Many of these rooms often have the brown stains on the ceiling that are typical of water damage and while most people just paint over them, often the stains just keep coming back because the underlying problem has not been fixed yet.
It is probably due to a leaky roof, but what about the steam that comes off of your bath water or off of the stove when you cook dinner? These every day tasks can be just as much of a cause of water damage as a leaking roof can be, if not more so because they happen every day. At least, a bath a day comes recommended, anyway. Installing a steam vent in your bathroom for under $100 and a day’s work could possibly be one of the best investments that you can make to help safeguard the appearance and structural integrity of your kitchen and bathroom.
Make sure that you do not allow your bath tub or your kitchen sink to overflow. Sometimes we turn on the bath water and get stuck talking to a relative or a co-worker on the phone, all the while unaware that the water you wanted in your tub is pouring all over your floor. The same thing can happen when you are cooking in the kitchen or washing dishes. This can land quite a lot of water in your floor before you realize it and can do quite a bit of damage to your floor if you let it happen often.
An overflowing toilet is also a hazard, not only because of the water damage that can occur, but also due to the possible sewage content of the water when you go to flush it. If not cleaned up properly, mold can start to grow around the base of the toilet, especially if you have carpet in your bathroom. Carpet in the bathroom is a no-no.
Also avoid throwing wet dirty clothes into your bathroom floor or closet, especially if you happen to have a carpeted bathroom. You will probably forget that these wet clothes are there and throw dry ones on top of it.
This results in water damage and mold growth more often than not when the closet is not cleaned out. The best thing to do is to wash wet clothes and towels as soon as possible so they are not forgotten about or at the very least stored separately from dry dirty clothes.
Showing posts with label house. Show all posts
Showing posts with label house. Show all posts
Friday, January 18, 2008
What You Need When Removing Mold
A lot of people dream of purchasing a home that is a “fixer-upper”, but many are wary about purchasing homes that are contaminated with mold in different areas. Depending on how old the home is, what condition it is in structurally, and where it is located, it may be feasible to attempt to remediate the home yourself on top of the normal remodeling that you are going to have to do. When you have to remodel a home due to cosmetic issues, a lot of the time you have to remove building materials, anyway, so why not go the extra mile and remove the mold from the home?
Professional remediation can be expensive, but if you know what you are doing and know what equipment you will need to take up the job and complete it successfully, you could have a gem of a house in not a large amount of time.
If you do choose to remediate the home yourself instead of hiring a professional, you might want to know what you will need to do it. Hiring someone to at least assess the remediation needs of the home is advised. Some heavy duty chemicals that will kill the mold will be necessary if it is growing on non-porous surfaces like tile. Almost anything else that is contaminated by mold, such as drywall, will have to be removed and replaced. Remove any and everything from the home with mold on it; do not let it come into contact with new building materials that you have purchased.
Heavy duty trash bags and a vacuum cleaner with a HEPA filter system on it are recommended. The vacuum will remove any mold spores from the floor after the remediation job is done with.
Respirators are a must when taking on a mold remediation job. Even if the infection is not that severe, breathing mold spores is still a hazard to your health and many problems can arise. You may be allergic and not even know it. Purchase a good quality respirator if you plan on taking out any drywall or old wood. Protective clothing so the spores do not get on your skin is also a good idea. Purchase a roll of duct tape to seal the gaps between your protective suit and your shoes. Disposable protective clothing for mold remediation is available and it not very expensive. The most expensive piece of equipment you will need is the respirator and there is no reason to skimp on that part.
Professional remediation can be expensive, but if you know what you are doing and know what equipment you will need to take up the job and complete it successfully, you could have a gem of a house in not a large amount of time.
If you do choose to remediate the home yourself instead of hiring a professional, you might want to know what you will need to do it. Hiring someone to at least assess the remediation needs of the home is advised. Some heavy duty chemicals that will kill the mold will be necessary if it is growing on non-porous surfaces like tile. Almost anything else that is contaminated by mold, such as drywall, will have to be removed and replaced. Remove any and everything from the home with mold on it; do not let it come into contact with new building materials that you have purchased.
Heavy duty trash bags and a vacuum cleaner with a HEPA filter system on it are recommended. The vacuum will remove any mold spores from the floor after the remediation job is done with.
Respirators are a must when taking on a mold remediation job. Even if the infection is not that severe, breathing mold spores is still a hazard to your health and many problems can arise. You may be allergic and not even know it. Purchase a good quality respirator if you plan on taking out any drywall or old wood. Protective clothing so the spores do not get on your skin is also a good idea. Purchase a roll of duct tape to seal the gaps between your protective suit and your shoes. Disposable protective clothing for mold remediation is available and it not very expensive. The most expensive piece of equipment you will need is the respirator and there is no reason to skimp on that part.
The Mold Remediation Equipment You Need
Depending on how much mold needs to be removed from your home, the equipment that you will need in order to finish the job will vary greatly. If you cannot afford to hire a professional and plan on doing the entire job yourself, you probably want to know the best and safest way to complete the job. If you do not take care, you should realize that kind of biological hazard that you are exposing yourself to if you do not purchase the right level of protection equipment. This can include aggravation of your asthma, emphysema, the occurrence of skin rashes, respiratory infections, and eye infections can result, among other health complications. If you are sure you want to take on this job by yourself, consider yourself warned.
Washing mold off of drywall or other porous surfaces with chemicals will work only on a superficial level. It will not kill the mold that has worked its way into the depth of the drywall and contaminated the other side in the wall. Most drywall that becomes contaminated with mold will need to be completely replaced. If the mold growth appears to be light and you catch it new, you might be able to avoid this. Purchase heavy duty trash bags that will hold all the contaminated materials that you remove from the home, but make sure to not touch contaminated items to non-contaminated items, because of the possibility of cross-contamination.
Respirators should be used when doing any kind of mold remediation job. An N-95 respirator is recommended at the very least for light jobs and for more extensive jobs, a full face respirator with a HEPA filter should be purchased. These larger jobs are usually done on older houses that are being renovated and almost completely gutted to remove contamination, but any job that requires removing drywall and throwing it away requires a respirator of some level. A full face mask will cost you around $130. Protective clothing can also be purchased, such as rubber gloves and shoes that will not allow the mold spores to come into contact with your skin.
A vacuum cleaner with a HEPA filter will also help you tremendously when you are cleaning your home after the remediation is done. This will collect all the mold spores and particles from your floor and carpet and deposit them into a receptacle that you can empty when you are done. Be careful emptying this container, though, and do not touch the contents with your bare hands. Do not stir up the contents any more than you have to in order to get them into the trash bag.
Washing mold off of drywall or other porous surfaces with chemicals will work only on a superficial level. It will not kill the mold that has worked its way into the depth of the drywall and contaminated the other side in the wall. Most drywall that becomes contaminated with mold will need to be completely replaced. If the mold growth appears to be light and you catch it new, you might be able to avoid this. Purchase heavy duty trash bags that will hold all the contaminated materials that you remove from the home, but make sure to not touch contaminated items to non-contaminated items, because of the possibility of cross-contamination.
Respirators should be used when doing any kind of mold remediation job. An N-95 respirator is recommended at the very least for light jobs and for more extensive jobs, a full face respirator with a HEPA filter should be purchased. These larger jobs are usually done on older houses that are being renovated and almost completely gutted to remove contamination, but any job that requires removing drywall and throwing it away requires a respirator of some level. A full face mask will cost you around $130. Protective clothing can also be purchased, such as rubber gloves and shoes that will not allow the mold spores to come into contact with your skin.
A vacuum cleaner with a HEPA filter will also help you tremendously when you are cleaning your home after the remediation is done. This will collect all the mold spores and particles from your floor and carpet and deposit them into a receptacle that you can empty when you are done. Be careful emptying this container, though, and do not touch the contents with your bare hands. Do not stir up the contents any more than you have to in order to get them into the trash bag.
Tell Your Insurance Adjuster About Mold in History
Getting your insurance company or your landlord to repair the mold damage to your home or apartment is almost the equivalent of trying to pull teeth without going to the dentist and receiving no anesthetic. Most insurance policies do not cover mold damage to your home unless it is due to something that your insurance policy DOES cover, such as water damage (except when said damage was due to a flood). If you have a landlord and the property that you live on is infested with mold, getting the landlord’s attention and getting him to remedy the problem is sometimes a big problem by itself, even though the property does not belong to you.
Some landlords and insurance claims adjusters will tell you that mold is not as big of a problem as some media stations and remediation companies are making it out to be, but the fact is that the proof is there. All you have to do is research for yourself and the Centers for Disease Control and even the Holy Bible itself says that mold is a serious health threat. You do not have to look very far into the Bible to see its account of what mold infested homes used to go through.
Leviticus 14:37-49 says if you suspected that your home was infested with mold you were to do what anyone else who lived during that time would do for almost any problem occurring in their lives: you would visit the rabbi. The rabbi would come to your house, inspect it, and deem it either diseased or clean. If it was deemed to be diseased or “plagued”, everything was removed from the household. These items were taken far away from town to what the Bible calls an “unclean place”. The house was closed for seven days and the rabbi returned at the end of that period to see if the infection remained. If it did, the house was torn down, the building materials taken to that unclean place, and the home re-built. Clothing deemed contaminated by the rabbi was also thrown away.
So, no matter what any landlord or insurance claims adjuster might tell you, mold is a dangerous threat to yourself and has been a problem since ancient times. Do not agree with them when they tell you that the mold is not a health threat or that the contamination is somehow your fault. Remain consistent in your effort to file your claim or to get your landlord to fix the problem.
Some landlords and insurance claims adjusters will tell you that mold is not as big of a problem as some media stations and remediation companies are making it out to be, but the fact is that the proof is there. All you have to do is research for yourself and the Centers for Disease Control and even the Holy Bible itself says that mold is a serious health threat. You do not have to look very far into the Bible to see its account of what mold infested homes used to go through.
Leviticus 14:37-49 says if you suspected that your home was infested with mold you were to do what anyone else who lived during that time would do for almost any problem occurring in their lives: you would visit the rabbi. The rabbi would come to your house, inspect it, and deem it either diseased or clean. If it was deemed to be diseased or “plagued”, everything was removed from the household. These items were taken far away from town to what the Bible calls an “unclean place”. The house was closed for seven days and the rabbi returned at the end of that period to see if the infection remained. If it did, the house was torn down, the building materials taken to that unclean place, and the home re-built. Clothing deemed contaminated by the rabbi was also thrown away.
So, no matter what any landlord or insurance claims adjuster might tell you, mold is a dangerous threat to yourself and has been a problem since ancient times. Do not agree with them when they tell you that the mold is not a health threat or that the contamination is somehow your fault. Remain consistent in your effort to file your claim or to get your landlord to fix the problem.
Selling Moldy Real Estate
If you are trying to sell a house that is contaminated with mold, you probably have a pretty short list of possible buyers. You also probably do not want to lose any of those possible buyers and you want the transaction to go as smoothly as possible. There are a few tips that you can use when selling a home like this to make sure that you get the most you can possibly get.
You need to allow the buyer to inspect the house for themselves and find out what kind of mold exists on the property. An environmental inspection clause should be included into the sales contract. If you can have the mold removed from the home at your own expense without taking a huge profit loss, you should do so. A buyer will be much more quick to actually purchase the home from you if you are completely honest about the home’s condition. You will also be able to sell the home quicker if the mold inside it is not toxic. If you can prove that it is not via mold testing kits, then the sale will go by quicker.
Again, make no attempts to cover up the mold problem in the house. Do not be nervous about it. If it is beyond your ability to remove the mold, then tell the buyer so. Explain your situation. If they are sympathetic, they may or may not be more willing to purchase from you. If they suspect you are hiding something, however, they will likely walk right out the door.
In the final sales contract, you need to have a clause that releases you and anyone involved in your end of the deal from any legal liability due to the mold. This states that the buyer already knew that the mold existed on the property and that you are no longer responsible for its presence. Include that the home was sold to the buyer in an “as-is” state and that you are not responsible for the property nor is there any warranty on it, implied or otherwise.
List all past major damage that the home has suffered due to water damage or mold so that your buyer has a complete history. Giving this information to your buyer will show them that they can trust you and that you are hiding nothing from them. This should leave you on solid ground once the final contract is signed.
You need to allow the buyer to inspect the house for themselves and find out what kind of mold exists on the property. An environmental inspection clause should be included into the sales contract. If you can have the mold removed from the home at your own expense without taking a huge profit loss, you should do so. A buyer will be much more quick to actually purchase the home from you if you are completely honest about the home’s condition. You will also be able to sell the home quicker if the mold inside it is not toxic. If you can prove that it is not via mold testing kits, then the sale will go by quicker.
Again, make no attempts to cover up the mold problem in the house. Do not be nervous about it. If it is beyond your ability to remove the mold, then tell the buyer so. Explain your situation. If they are sympathetic, they may or may not be more willing to purchase from you. If they suspect you are hiding something, however, they will likely walk right out the door.
In the final sales contract, you need to have a clause that releases you and anyone involved in your end of the deal from any legal liability due to the mold. This states that the buyer already knew that the mold existed on the property and that you are no longer responsible for its presence. Include that the home was sold to the buyer in an “as-is” state and that you are not responsible for the property nor is there any warranty on it, implied or otherwise.
List all past major damage that the home has suffered due to water damage or mold so that your buyer has a complete history. Giving this information to your buyer will show them that they can trust you and that you are hiding nothing from them. This should leave you on solid ground once the final contract is signed.
Natural Ways To Kill Mold
If you are a person that likes to use organic products and remedies, then using chemically-based mold killers in your home is possibly a taboo subject, but what else can you do? Some people say that we have become far too dependent on chemicals to do what nature can do and they have found some natural ways to kill mold that you might not have thought of before and at least one of them should be readily found in your own kitchen cabinet, even if it is a little smelly.
The most available and cheap way to kill mold without buying a bunch of chemical cleaners is simply white vinegar. This method is pretty simple to use and it does not take a lot of effort to prepare it. Vinegar kills somewhere around 80 percent of the different kinds of mold that will grow in your home and even better, if you spill white vinegar onto your carpet or furniture, there is no risk that it will discolor it. It should kill almost any kind of mold you come across in your home or business and if it does not, you probably have a more serious contamination that you should not be trying to deal with on your own, anyway. The only thing that you will need for this is a spray bottle and a funnel. Pour a sufficient amount of vinegar into the spray bottle and spray it where you find it necessary. The only drawback to this method is that it will be smelly in your house for a few hours. It will go away before the day is over.
Tea tree oil can also kill mold, but it is a bit more expensive than vinegar. You should be able to find it at most health food stores and it will kill a few more kinds of mold than vinegar will. All you have to do with this one is take two teaspoons of tea tree oil and combine it with 2 cups of water. Pour into a spray bottle and spray where you need to. Do not rinse. The shelf life on this mixture is indefinite.
The last say is almost identical to the tea tree oil method. Take about 20 drops of grapefruit seed extract and combine it with 2 cups of water. Put it into a spray bottle and spray where you need to. The good thing about this method is that there is no smell.
The most available and cheap way to kill mold without buying a bunch of chemical cleaners is simply white vinegar. This method is pretty simple to use and it does not take a lot of effort to prepare it. Vinegar kills somewhere around 80 percent of the different kinds of mold that will grow in your home and even better, if you spill white vinegar onto your carpet or furniture, there is no risk that it will discolor it. It should kill almost any kind of mold you come across in your home or business and if it does not, you probably have a more serious contamination that you should not be trying to deal with on your own, anyway. The only thing that you will need for this is a spray bottle and a funnel. Pour a sufficient amount of vinegar into the spray bottle and spray it where you find it necessary. The only drawback to this method is that it will be smelly in your house for a few hours. It will go away before the day is over.
Tea tree oil can also kill mold, but it is a bit more expensive than vinegar. You should be able to find it at most health food stores and it will kill a few more kinds of mold than vinegar will. All you have to do with this one is take two teaspoons of tea tree oil and combine it with 2 cups of water. Pour into a spray bottle and spray where you need to. Do not rinse. The shelf life on this mixture is indefinite.
The last say is almost identical to the tea tree oil method. Take about 20 drops of grapefruit seed extract and combine it with 2 cups of water. Put it into a spray bottle and spray where you need to. The good thing about this method is that there is no smell.
Household Water Damage Prevention Tips
Water damage is something that no homeowner wants to have to deal with, but many times it is just a fact of life. Whether it is a flood, excessive rain, or even something as devastating as a hurricane, sometimes water damage cannot be helped, but what about the water damage that occurs to our homes that are simply accidents? Or something that we have just overlooked for far too long? There are quite a few things that you can to in order to keep water damage from impacting your pocketbook, but for them to have any affect, you have to remain vigilant.
Cleaning out your rain gutters as soon as the leaves stop falling in autumn is a pretty good idea. What your rain gutters do is keep the rain that falls on your roof from simply falling to the base of your home and settling there. Allowing water to settle around the base of your home will eventually cause it to sink into the ground, doing damage not only to the structure of the house, but also to the home’s value, as well. Another way to prevent this kind of slowly occurring damage is to make sure that the soil around the foundation of your home is piled up against the house at an angle so water drains away from the foundation naturally. Keep downspouts clear of leaves and sticks, as well, and make sure that the bottom of the downspout has gully that drains the water coming out of it away from the home.
Making sure the plumbing that leads to your dishwasher or to your clothes washer is of good condition. You should not have to replace these hoses very often, maybe around every 4 to 5 years, but hoses of poor quality can rupture and leave you with a huge mess, especially if you happen to be out of the home at the time it bursts. Clean up any spills as quickly as possible, but if the floor in your kitchen is hardwood, the best thing to do is just soak up whatever water you can with towels. If you have a vacuum used to draw water up, such as a carpet shampooer, you can use this to get some more of the water out. Do not use artificial heat to dry your floor, because this can cause the floor to buckle or cause what is called “cupping”.
Something else that you can do is install a vent in your bathroom and kitchen. This allows the steam that builds up from cooking or bathing to escape the house and not be absorbed by your walls and ceiling.
Cleaning out your rain gutters as soon as the leaves stop falling in autumn is a pretty good idea. What your rain gutters do is keep the rain that falls on your roof from simply falling to the base of your home and settling there. Allowing water to settle around the base of your home will eventually cause it to sink into the ground, doing damage not only to the structure of the house, but also to the home’s value, as well. Another way to prevent this kind of slowly occurring damage is to make sure that the soil around the foundation of your home is piled up against the house at an angle so water drains away from the foundation naturally. Keep downspouts clear of leaves and sticks, as well, and make sure that the bottom of the downspout has gully that drains the water coming out of it away from the home.
Making sure the plumbing that leads to your dishwasher or to your clothes washer is of good condition. You should not have to replace these hoses very often, maybe around every 4 to 5 years, but hoses of poor quality can rupture and leave you with a huge mess, especially if you happen to be out of the home at the time it bursts. Clean up any spills as quickly as possible, but if the floor in your kitchen is hardwood, the best thing to do is just soak up whatever water you can with towels. If you have a vacuum used to draw water up, such as a carpet shampooer, you can use this to get some more of the water out. Do not use artificial heat to dry your floor, because this can cause the floor to buckle or cause what is called “cupping”.
Something else that you can do is install a vent in your bathroom and kitchen. This allows the steam that builds up from cooking or bathing to escape the house and not be absorbed by your walls and ceiling.
Subscribe to:
Posts (Atom)
